Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Section 3: Functions and features
077114601 / March 2019
3-21
Clearing the buffer
You can clear all readings and statistics from the buffer. The following topics provide information
about using the front panel or remote commands to clear a buffer.
To use the front panel to clear a reading buffer:
1. Press the
MENU
key.
2. Under Measure, select
Data Buffers.
3. Select
Clear Buffer
to clear the buffer.
4. When the
Are you sure you want to clear buffer
prompt is displayed, press
Yes
to confirm.
To clear the buffer, send the following command:
:TRACe:CLEar
Automatically clearing a buffer
When using the power supply function, you can enable the autoclear function for the buffer. With
autoclear enabled, the buffer is automatically cleared when the storage process starts.
Buffer autoclear is only available when using the power supply function.
Using the front panel:
1. Press the
MENU
key.
2. Under Measure, select
Data Buffers
.
3. Select the button next to
Auto Clear
. The selection window is displayed.
4. Select
On
to enable the autoclear function.
Using the SCPI commands:
:TRACe:CLEar:AUTO ON
:TRACe:CLEar:AUTO OFF
