Section 2: General operation
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
2-86
077114601 / March 2019
There are three ways to log data on the web page:
There is a
STOP MODE
box in the upper right corner of the screen.
If you choose
Manual,
you start and stop the data logging manually.
If you choose
Time (ms)
, the data logging stops at the preset time limit.
If you choose
Points
, the data logging stops at the preset point limit.
2. Select
Start
on the right side of the screen to start logging test data on the web page.
3. If the data logging mode is set to Manual, select
Stop
on the right side of the screen to stop
logging test data. If the mode is set to Time or Point, the logging will stop automatically when the
time or point limit is reached. The data is logged as shown in the following figure:
Figure 59: Data logged on web page
The table headings are arranged by default for the power supply function. When you start to log data
on the web page, the table headings change based on the function you choose.
