TECO-Westinghouse PA7300 Series, Installation And Operation Manual

Page: 52 / 154

2-2
PA 7300 PART II: OPERATION MANUAL
2.2 Parameters That Can Be Changed during Run Bn-
In the DRIVE mode, the Parameter group can be monitored and set by the users.
Function Parameter Setting Factory Ref.
No. Name LCD Display (English) Range Setting Unit Setting Page
Bn-01 Acceleration Time 1 Bn-01=0010.0s
Acc. Time 1 0.0 ~ 6000.0s 0.1s 10.0s
Bn-02 Deceleration Time 1 Bn-02=0010.0s
Acc/Dec Dec. Time 1 0.0 ~ 6000.0s 0.1s 10.0s 2-4
time Bn-03 Acceleration Time 2 Bn-03=0010.0s
Acc. Time 2 Acc. Time 2 0.0 ~ 6000.0s 0.1s 10.0s
Bn-04 Deceleration Time 2 Bn-04=0010.0s
Dec. Time 2 Dec. Time 2 0.0 ~ 6000.0s 0.1s 10.0s
Bn-05 Analog Frequency Bn-05=0100.0%
Analog Cmd. Gain (Voltage) ~ Freq. Cmd. Gain 0.0 ~ 1000.0% 0.1% 100.0%
Frequency Bn-06 Analog Frequency Bn-06=0000.0%
Command Cmd. Bias (Voltage) ~ Freq. Cmd. Bias -100.0% ~ 100.0% 0.1% 0.0% 2-4
Torque Bn-07 Auto torque Boost
Boost Gain (Ineffective in Bn-07=1.0
energy-saving mode) Auto_Boost Gain 0.0 ~ 2.0 0.1 1.0 2-4
A01bias Bn-08 Multi-Function Analog Bn-08 =00.0%
Output A01 Bias ~Output A01 Bias -25.0%~+25.0% 0.1% 0.0% 2-4
A02 bias Bn-09 Multi-Function Analog Bn-09 =00.0%
Output A02 Bias ~Output A02 Bias -25.0%~+25.0% 0.1% 0.0% 2-5
Bn-10 Monitor No. After Bn-10=1
power ON Power On Contents 1 ~ 4 1 1 2-5
A01 Gain Bn-11 Multi-Function Analog Bn-11=1.00
Output A01 Gain ~Output A01 Gain 0.01 ~ 2.55 0.01 1.00 2-5
A02 Gain Bn-12 Multi-Function Analog Bn-12=1.00
Output A02 Gain ~Output A02 Gain 0.01 ~ 2.55 0.01 1.00 2-5
Bn-13 PID Fedback Gain Bn-13=01.00
PID Det. Gain 0.01 ~ 10.00 0.01 1.00
Bn-14 PID Proportional Gain Bn-14=01.0
PID P-Gain 0.0 ~ 10.0 0.1 1.0 2-5
Bn-15 PID Integral Gain Bn-15=010.0s 2-6
PID PID I-Time 0.0 ~ 100.0s 0.1s 10.0s
Control Bn-16 PID Differential Time Bn-16=0.00s
PID D-Time 0.00 ~ 1.00s 0.01s 0.00s
Bn-17 PID Bias Bn-17=000%
PID Bias 0 ~ 109%* 1 1% 0%
Bn-18 PID sleep Frequency Bn-18=000.00Hz
PID SLEEP FREQUENCY 0.00 ~ 180.00Hz 0.01Hz 00.00Hz 2-6
PID Sleep Bn-19 PID sleep/Wake Bn-19=000.0s 2-7
Mode Delay Time PID SLEEP TIME 0.0 ~ 255.5Sec 0.1s 0.00s
Bn-20 PID Wake Bn-20=60.00 Hz
Frequency WAKE UP FREQUENCY 0.00 ~ 180.00Hz 0.01Hz 60.00Hz
*1. The value set in Cn-04 is to be the 100% level.