Taylor TX180S, Maintenance Manual

Page: 225 / 320

TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07) 17-2 17-2
2 2
7 7
9 9
Illustration 17-1. Illustration 17-1. Drive Axle Wheel Drive Axle Wheel Nuts T Nuts T orquing Sequence (TX180S - 360L) orquing Sequence (TX180S - 360L)
Torquing Procedure Torquing Procedure (Illustrations 17-1 through (Illustrations 17-1 through
17-4) 17-4) . . Perform the Perform the following procedures following procedures to torque to torque
the wheel nuts: the wheel nuts:
  Every time the wheels are Every time the wheels are
removed, a removed, a run-in per run-in per iod is iod is required. required. The The
wheel nuts must be re-torqued every 10 hours wheel nuts must be re-torqued every 10 hours
of operation until rims are fully seated. of operation until rims are fully seated.
1. 1. Sta Sta rt at po rt at po sit sit ion #1 a ion #1 a nd tig nd tig hte hte n the wh n the wh eel nu eel nu t t
to the to the specified torque specified torque value listed. value listed. Proceed Proceed
in the illustrated numerical order to torque the in the illustrated numerical order to torque the
other wheel nuts. other wheel nuts.
2. 2. Rep Rep eat pr eat pr oce oce dur dur e 1. unt e 1. unt il no wh il no wh eel nu eel nu t mov t mov es es
when the proper when the proper torque value is torque value is applied. applied. Pro- Pro-
cedure 1. may have to be repeated several cedure 1. may have to be repeated several
times to tighten the wheel nuts to the proper times to tighten the wheel nuts to the proper
torque value. torque value.
Inspection Inspection
 
 
Mixing parts Mixing parts of one m of one m anufacturer’s rims anufacturer’s rims with with
those of another is those of another is potentially dangerous. potentially dangerous.
Always check manufacturer for approval. Always check manufacturer for approval.
 
Do Do not b not b e careless e careless or or take chances. take chances. If you If you
are not sure about the are not sure about the proper mating of rim proper mating of rim
and wheel parts, consult a wheel and rim and wheel parts, consult a wheel and rim
expert. expert. This may b This may b e the tire e the tire man who i man who i s s
servicing your fleet or the rim and wheel servicing your fleet or the rim and wheel
distributor in your area. distributor in your area.
1. 1. Multi Multi -piece -piece rims rims and and all all rim rim compo compo nents nents must must
be inspected before re-assembly each time be inspected before re-assembly each time
the tire is removed from the rim for repair and the tire is removed from the rim for repair and
each time the each time the tire is replaced. tire is replaced. Rims and all Rims and all rim rim
components should be inspected annually (or components should be inspected annually (or
every 3,000 hours) otherwise. every 3,000 hours) otherwise.
WHEEL NUT TORQUE VALUE WHEEL NUT TORQUE VALUE
 
Drive Axle.............490 - 510 ft-lbs Drive Axle.............490 - 510 ft-lbs
(670 - 695 N (670 - 695 N
⋅ ⋅
m) m)
 
These value is locat These value is locat ed on the ed on the truck truck
serial plate for reference. serial plate for reference.
https://www.forkliftpdfmanuals.com/