Taylor TX180S, Maintenance Manual

Page: 156 / 320

9C-7 9C-7 TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
( ) ( ) p p
ing the forward alarm in the ing the forward alarm in the Operator Controlled mode Operator Controlled mode , depress the F3 button to enable or disable the , depress the F3 button to enable or disable the
forward alarm. forward alarm. When the forward alarm When the forward alarm is disabled, no audible sound is disabled, no audible sound will be emitted by will be emitted by the forward alarm the forward alarm
when the electric shifter is plac when the electric shifter is plac ed in its Forward position. ed in its Forward position. A Forward Alarm Off t A Forward Alarm Off t ext message will be dis- ext message will be dis-
played on the Main Display played on the Main Display screen (refer to Illus screen (refer to Illus tration 9C-12) when the f tration 9C-12) when the f orward alarm is disabled. orward alarm is disabled. When When
the forward alarm is enabled, an audible sound will be emitted by the forward alarm once the electric shift- the forward alarm is enabled, an audible sound will be emitted by the forward alarm once the electric shift-
er is placed in its Forward position. er is placed in its Forward position.
FORWARD ALARM OFF FORWARD ALARM OFF
FORWARD ALARM ON FORWARD ALARM ON
Illustration 9C-12. Illustration 9C-12. Main Display Main Display Screen (Forward Screen (Forward Alarm Operation - Alarm Operation - Operator Controlled Mode Operator Controlled Mode ) )
Automatic Powershift Control (APC). Automatic Powershift Control (APC). The APC The APC
module controls shift module controls shift ing parameters. ing parameters. The T The T aylor aylor
Integrated Control System (TICS) monitors the Integrated Control System (TICS) monitors the
APC module via CAN-bus. APC module via CAN-bus. The TICS system will The TICS system will
signal the APC to go to Neutral Lock when the signal the APC to go to Neutral Lock when the
operator vacates the seat or alternate idle is operator vacates the seat or alternate idle is
activated. activated.
  Should any truck equipped Should any truck equipped
with an APC module require welding on with an APC module require welding on its its
structural members, the RS connector must be structural members, the RS connector must be
unplugged from the APC module prior to any unplugged from the APC module prior to any
welding. welding. Failure to Failure to comply with comply with this caution this caution
may lead to damage to the APC module. may lead to damage to the APC module.
https://www.forkliftpdfmanuals.com/