Taylor TX180S, Maintenance Manual

Page: 151 / 320

TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07) 9C-2 9C-2
Illustration 9C Illustration 9C -3. -3. Adjust Adjust Screen Screen
3. 3. At the Adjust scr At the Adjust scr een (Illus een (Illus trati trati on 9C-3), sele on 9C-3), sele ct Tr ct Tr ansmi ansmi ssion Adju ssion Adju st Group by depres st Group by depres sing the UP or sing the UP or
DOWN button to highlight the selection (if the selection is not already highlighted). DOWN button to highlight the selection (if the selection is not already highlighted).
NOTE: NOTE:
The The cate- cate-
gory is highlighted when a black box appears behind the selection (category text will be white). gory is highlighted when a black box appears behind the selection (category text will be white).
Depress the OK button to access the T Depress the OK button to access the T ransmission Adjust Group screen. ransmission Adjust Group screen. The PIN code screen will The PIN code screen will
appear. appear. The Pin Code must be The Pin Code must be entered before the software entered before the software will allow any adjustments will allow any adjustments to be made. to be made.
DEPRESS UP OR DEPRESS UP OR
DOWN BUTTON DOWN BUTTON
TO SELECT THE TO SELECT THE
NUMERIC DIGITS NUMERIC DIGITS
OF THE PIN CODE. OF THE PIN CODE.
DEPRESS OK BUT- DEPRESS OK BUT-
TON AFTER EACH TON AFTER EACH
DIGIT IS ENTERED. DIGIT IS ENTERED.
Illustration 9C-4. Illustration 9C-4. Pin Pin Code Code Screen Screen
4. 4. From the PI From the PI N code scr N code scr een (Ill een (Ill ustrat ustrat ion 9C-4) ion 9C-4) , depres , depres s the UP or DOWN b s the UP or DOWN b utton unt utton unt il the firs il the firs t numeri t numeri c c
digit appears in the first f digit appears in the first f ield. ield. Depress the OK button to Depress the OK button to enter the numeric digit and adv enter the numeric digit and adv ance to the ance to the
second field. second field. Repeat this Repeat this procedure until procedure until all four numeric all four numeric digits have digits have been entered. been entered. After the After the code code
has been entered, OK will be highlighted; depress the OK button to view the Transmission Adjust has been entered, OK will be highlighted; depress the OK button to view the Transmission Adjust
Group screen. Group screen.
DEPRESS UP OR DEPRESS UP OR
DOWN BUTTON TO DOWN BUTTON TO
SELECT GROUP; SELECT GROUP;
DEPRESS OK BUT- DEPRESS OK BUT-
TON TO ENTER TON TO ENTER
INTO DESIRED INTO DESIRED
GROUP. GROUP.
https://www.forkliftpdfmanuals.com/