Taylor TX180S, Maintenance Manual

Page: 20 / 320

1-3 1-3 TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
manufacturer’s operation and maintenance manufacturer’s operation and maintenance
manual. manual.
Air Conditioning Drive Belt Air Conditioning Drive Belt T T ension ension (if equipped (if equipped
with air conditioning) with air conditioning) . . T T ension on the air ension on the air condi- condi-
tioning drive belt should be such that a firm push tioning drive belt should be such that a firm push
with the thumb at a point midway between the two with the thumb at a point midway between the two
pulleys will deflect the belt about 3/8 to 1/2 inch pulleys will deflect the belt about 3/8 to 1/2 inch
(9.5 to 12.7 (9.5 to 12.7 mm). mm). If the def If the def lection measured is lection measured is
greater than the amount specified above, the drive greater than the amount specified above, the drive
belt must be replaced. belt must be replaced.
Checking Engine Mounting Bolts. Checking Engine Mounting Bolts. The The engine engine
mounting bolts should be checked for the mounting bolts should be checked for the
appropriate torque every 6 months or 1,500 hours, appropriate torque every 6 months or 1,500 hours,
whichever comes whichever comes first. first. If a lock If a lock nut requires retor- nut requires retor-
quing, remove and clean the bolt and locknut. quing, remove and clean the bolt and locknut.
Apply Apply Loctite Loctite
 
to the threads of the bolt, and to the threads of the bolt, and
re-install the bolt re-install the bolt and locknut. and locknut. T T orque the locknuts orque the locknuts
on the Cummins engine mounting bolts to 200 - on the Cummins engine mounting bolts to 200 -
220 ft-lbs (270 - 300 N 220 ft-lbs (270 - 300 N
⋅ ⋅
m). m). Inspect Inspect the the rubber rubber
mounts for deterioration and age hardening. mounts for deterioration and age hardening.
Replace any broken or lost bolts and damaged Replace any broken or lost bolts and damaged
rubber mounts. rubber mounts.
Illustration Illustration 1-2. 1-2. Drive Drive Belt Inspec Belt Inspec tion tion
Cummins QSB6.7 Engine General Information Cummins QSB6.7 Engine General Information
Oil Pressure Oil Pressure
30 - 55 psi 30 - 55 psi
(210 - 280 (210 - 280
kPa kPa
) )
Oil Capacity Oil Capacity
(includes filter change) (includes filter change)
15 Quarts 15 Quarts
(14.2 Liters) (14.2 Liters)
L L o o w w R R P P M M s s ( ( n n o o l l o o a a d d ) ) 7 7 5 5 0 0 r r p p m m
NOTE: NOTE: Some special Some special applications applications may use may use
engine speed settings that are different from the engine speed settings that are different from the
standards shown. standards shown. The proper The proper settings are perma- settings are perma-
nently stamped on nently stamped on a metal tag affixed a metal tag affixed to the to the
engine. engine.
Engine Repair. Engine Repair. If repair If repair of the of the engine is engine is needed, needed,
contact a T contact a T aylor Machine Works, Inc. aylor Machine Works, Inc. authorized authorized
dealer for service. dealer for service.
CUMMINS CUMMINS
PLUG PLUG
OEM (TAYLOR) OEM (TAYLOR)
PLUG PLUG
OEM (TAYLOR) OEM (TAYLOR)
PLUG PLUG
Illustration Illustration 1-3. 1-3. ECM ECM Plugs Plugs
https://www.forkliftpdfmanuals.com/