9C-31
9C-31
TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
to
to
b,
b,
or the
or the
output is not con-
output is not con-
nected.
nected.
taken.
taken.
wiring between the
wiring between the
controller and the
controller and the
other device, Check
other device, Check
the other device.
the other device.
7
7
2
2
.
.
0
0
2
2
S
S
/
/
A
A
O
O
u
u
t
t
p
p
u
u
t
t
2
2
(
(
w
w
i
i
r
r
e
e
s A
s A
0
0
6
6
& A07) related fault:
& A07) related fault:
– wires A06 &
– wires A06 &
A07
A07
configured as analog
configured as analog
output:
output:
the output current
the output current
exceeds 1400 mA.
exceeds 1400 mA.
Action will de
Action will de
pend
pend
on the function
on the function
assigned to the out-
assigned to the out-
put:
put:
– critical o
– critical o
utput (eg.
utput (eg.
transmission valve
transmission valve
control): the control-
control): the control-
ler reverts to a ”limp
ler reverts to a ”limp
home” mode.
home” mode.
– non–critical f
– non–critical f
eature
eature
output: the controller
output: the controller
will flag the fault, but
will flag the fault, but
no actions will be
no actions will be
taken.
taken.
“limp home“ mode:
“limp home“ mode:
Stop machine and
Stop machine and
go to neutral to be
go to neutral to be
able to drive again.
able to drive again.
”Limp home” mode
”Limp home” mode
will result in reduced
will result in reduced
driving functionality.
driving functionality.
Contact mainte-
Contact mainte-
nance for trouble-
nance for trouble-
shooting.
shooting.
– wires A06 &
– wires A06 &
A07
A07
configured as analog
configured as analog
output:
output:
the output current
the output current
exceeds 1400 mA.
exceeds 1400 mA.
If the output is con-
If the output is con-
figured as an output
figured as an output
to a transmission
to a transmission
solenoid:
solenoid:
Check the wiring
Check the wiring
between the control-
between the control-
ler and the VFS/
ler and the VFS/
Selector solenoid 2,
Selector solenoid 2,
Check the VFS/
Check the VFS/
selector solenoid 2.
selector solenoid 2.
If the output is con-
If the output is con-
nected to an other
nected to an other
device: Check the
device: Check the
wiring between the
wiring between the
controller and the
controller and the
other device, Check
other device, Check
the other device.
the other device.
7
7
2
2
.
.
0
0
3
3
S
S
/
/
A
A
O
O
u
u
t
t
p
p
u
u
t
t
2
2
(
(
w
w
i
i
r
r
e
e
s A
s A
0
0
6
6
& A07) related fault:
& A07) related fault:
– wires A06 &
– wires A06 &
A07
A07
configured as analog
configured as analog
output:
output:
the output current is
the output current is
out of range, occurs
out of range, occurs
when the load has
when the load has
the incorrect imped-
the incorrect imped-
ance.
ance.
Action will de
Action will de
pend
pend
on the function
on the function
assigned to the out-
assigned to the out-
put:
put:
– critical o
– critical o
utput (eg.
utput (eg.
transmission valve
transmission valve
control): the control-
control): the control-
ler reverts to a ”limp
ler reverts to a ”limp
home” mode.
home” mode.
– non–critical f
– non–critical f
eature
eature
output: the controller
output: the controller
will flag the fault, but
will flag the fault, but
no actions will be
no actions will be
taken.
taken.
“limp home“ mode:
“limp home“ mode:
Stop machine and
Stop machine and
go to neutral to be
go to neutral to be
able to drive again.
able to drive again.
”Limp home” mode
”Limp home” mode
will result in reduced
will result in reduced
driving functionality.
driving functionality.
Contact mainte-
Contact mainte-
nance for trouble-
nance for trouble-
shooting.
shooting.
– wires A06 &
– wires A06 &
A07
A07
configured as analog
configured as analog
output:
output:
the output current is
the output current is
out of range, occurs
out of range, occurs
when the load has
when the load has
the
the
incorrect
incorrect
imped-
imped-
ance.
ance.
If the output is con-
If the output is con-
figured as an output
figured as an output
to a transmission
to a transmission
solenoid:
solenoid:
Check the wiring
Check the wiring
between the control-
between the control-
ler and the VFS/
ler and the VFS/
Selector solenoid 2,
Selector solenoid 2,
Check the VFS/
Check the VFS/
selector solenoid 2.
selector solenoid 2.
If the output is con-
If the output is con-
nected to an other
nected to an other
device: Check the
device: Check the
wiring between the
wiring between the
controller and the
controller and the
other device, Check
other device, Check
the other device.
the other device.
Fault
Fault
C
C
o
o
d
d
e
e
T
T
y
y
p
p
e
e
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
’
’
s
s
A
A
c
c
t
t
i
i
o
o
n
n
D
D
r
r
i
i
v
v
e
e
r
r
A
A
c
c
t
t
i
i
o
o
n
n
F
F
a
a
u
u
l
l
t
t
C
C
a
a
u
u
s
s
e
e
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
7
7
3
3
.
.
0
0
0
0
S
S
/
/
A
A
O
O
u
u
t
t
p
p
u
u
t
t
3
3
(
(
w
w
i
i
r
r
e
e
s
s
A
A
0
0
8
8
& A09) related fault:
& A09) related fault:
– wires A08 &
– wires A08 &
A09
A09
configured as analog
configured as analog
output:
output:
output wires are
output wires are
shorted to each
shorted to each
other, or the sense
other, or the sense
line is shorted to bat-
line is shorted to bat-
tery +, or the plus
tery +, or the plus
line is shorted to
line is shorted to
ground.
ground.
– wire A08 conf
– wire A08 conf
ig-
ig-
Action will dep
Action will dep
end
end
on the function
on the function
assigned to the out-
assigned to the out-
put:
put:
– critical ou
– critical ou
tput (eg.
tput (eg.
transmission valve
transmission valve
control): the control-
control): the control-
ler reverts to a ”limp
ler reverts to a ”limp
home” mode.
home” mode.
– non–critical f
– non–critical f
eature
eature
output: the controller
output: the controller
will flag the fault, but
will flag the fault, but
no actions will be
no actions will be
“limp home“ mode:
“limp home“ mode:
Stop machine and
Stop machine and
go to neutral to be
go to neutral to be
able to drive again.
able to drive again.
”Limp home” mode
”Limp home” mode
will result in reduced
will result in reduced
driving functionality.
driving functionality.
Contact mainte-
Contact mainte-
nance for trouble-
nance for trouble-
shooting.
shooting.
– wires A08 &
– wires A08 &
A09
A09
configured as analog
configured as analog
output:
output:
output wires are
output wires are
shorted to each
shorted to each
other
other
, or
, or
the sense
the sense
line is shorted to bat-
line is shorted to bat-
tery +, or the plus
tery +, or the plus
line is shorted to
line is shorted to
ground.
ground.
– wire A08 con
– wire A08 con
fig-
fig-
ured as digital out-
ured as digital out-
put: the output is
put: the output is
If the output is con-
If the output is con-
figured as an output
figured as an output
to a transmission
to a transmission
solenoid:
solenoid:
Check the wiring
Check the wiring
between the control-
between the control-
ler and the VFS/
ler and the VFS/
Selector solenoid 3,
Selector solenoid 3,
Check the VFS/
Check the VFS/
selector solenoid 3.
selector solenoid 3.
If the output is con-
If the output is con-
nected to an other
nected to an other
device: Check the
device: Check the
https://www.forkliftpdfmanuals.com/
Summary of Contents for TX180S
