Enter “SI CH Setting” submenu, according to the
following steps:
Setup number of interpretation channels
→
Select
language for booth
→
Select number of booths Select
Output Channel
→
Auto-Relay booth Setting
1)SI CH Setting
a). Setup number of interpretation channels
Rotate function knob to switch between 0-63;
If “0” is selected, it stands for no SI function,
press function knob to save and return to main
menu;
If other values are selected, it stands for the
number of interpretation channels, use the
“MENU” button to go to step b).
b). Select language for booth
To distribute interpretation languages separately, A/B/C
channels are provided in each Interpreter unit. The
language setting of A/B/C channels for all Interpreter
units in one booth is uniform. After setup of booth
numbers, the user interface to setup output channel
A/B/C language will show for each booth.
(1)Setup channel 1 first, rotate function knob to
switch between languages;
(2) Press function knob to confirm selected language
and go to next channel;
(3) Repeat (1) -(2) to setup language for all channels,
and go to step c).
c). Select number of booths
Rotate function knob to switch between 0-63. One
language will take one booth.
If “0” is selected, it stands for no SI function,
press function knob to save and return to main
menu;
If other values are selected, it stands for the
number of interpretation booths, press function
knob to go to step d).
d).Select Output Channel
Interpreter unit offers channel A, B and C to output, all
interpreter units in one booth share the same language.
After select the number of booths, it will enter interface
of booth language setting.
General procedure:
1
st
step:
select a language for channel A
2
nd
step:
select All or None for channel C
If All is selected for C then
3
rd
step
: select a language for B. Three channels are
now available: A and B output a selected language and
C outputs any available language.
If None is selected for C then
4
th
step:
select B: None or All
(1)Set language of channel A: Rotate function
knob to throughout all channels in step b)setting,
press the knob to confirm;
19
Summary of Contents for HCS-4800 Series
