Taiden HCS-4800 Series, Installation And Operating Manual

Page: 109 / 233

Figure 3.6.1:
1. Built-in Hi-Fi loudspeaker

Mutes automatically to suppress howling when the
microphone of the unit is active;

Loudspeaker sends out floor channel audio only.
The volume is controlled via the CMU or the
application software.
2. Contactless IC-Card reader
3. Multi-function keys with indicating light (5 keys):

In different modes, the corresponding indicating
lights blink; press the corresponding key to
execute operation (refer to table 3.6.1 for details);

For this series congress units with LCD, these five
keys act as functional keys for menu operation.
4. Priority key with indicating light (for the
chairman unit only):

According to the priority mode configuration on the
main unit:
a) If configured as “All mute”, all active delegate
microphones (except VIP units) will be muted
temporarily when this key is pressed and they
will resume when the key is released;
b) If configured as “All off”, all active delegate
microphones (except VIP units) will be switched
off when this key is pressed. Under “Open” and
“Request” mode, pressing this key will clear the
request list (deny all delegates’ requests to
speak);

If the chairman microphone is not active, pressing
this key will activate it;

If the ring mode is configured as “ON”, a ring tone
will be produced when this key is pressed.
5. Microphone On/Off key with indicating light (for
the chairman unit)
Microphone/request key with indicating light (for
the delegate unit):

Chairman unit: press this key to activate/deactivate
the microphone;

Delegate unit: press this key to activate/deactivate
the microphone or request/cancel
request to speak.
Work state Indicating light
Microphone On Red (on)
Speaking time limit Red (flash)
Request Green (on)
VIP indication Yellow (on)
6. Earphone volume control
7. Simultaneous interpretation channel selector

Available when earphone is plugged.
8. Earphone jack (Ø 3.5 mm)
9. Stem microphone socket
10. External microphone jack (Ø 3.5 mm)
11. High light 256x32 graphic LCD

Can display menu and information in several
languages (Simplified Chinese, Traditional
Chinese, English, etc.);

If the earphone is plugged, the simultaneous
interpretation channel number and the language
name will be displayed.
12. Mic. (RJ11 socket)

Connecting to RJ11 socket of the microphone
component.
13. CH SELECTOR (RJ11 socket)
14&15. 2 × RJ45 socket

For daisy chain connection;

Recommended to use of cat5e cable with a drain
wire & RJ45 plug with metal shield, and connect to
main unit via CBL8P2RJ45S converter cable.
16. RJ11 socket of the microphone component
17. TEST socket
18. Internal socket for SPK
19. 6-pin socket for MIC.
20. 3-pin micrphone EXT. MIC.
21. RS-232
96