In the above sign-in mode (except key press sign-in
mode), logout is available. It is used for locking the
units in case the delegates leave for a short time.
Delegate units will work on after delegates sign-in
again (The DCS server cannot stop sign-in).
3. Speaking
(without software)
Speaking mode is configured on the CMU (refer to
section 2.1.3).
A. “Open” mode
Active microphone number limitation (1~8)
NOT
reached
:
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1~8)
reached
:
a. Press the microphone On/Off key to request to
speak;
b. Press the microphone On/Off key again to
cancel the request to speak;
c. When an active microphone is turned off, the
first request microphone will be activated.
B. “Override” mode
■ Active microphone number limitation (1~8)
NOT
reached
:
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1~8)
reached
:
If the delegate microphone On/Off key is pressed,
its microphone will be activated and the first
activated delegate microphone will be deactivated
at the same time to maintain the active
microphone number limitation. If the number of
active microphone (including chairman and VIP
unit) reaches 8, turning on another microphone will
switch off the delegate microphone which turned
on first.
C. “Voice” mode
Active microphone number limitation (1~8)
NOT
reached
:
a. The microphone On/Off key indicating light
remains on. When the delegate speaks into the
microphone at a short distance, the microphone
will be activated;
b. If the delegate does not speak for several
seconds, the microphone will be deactivated
automatically. The interval time can be adjusted
at the main unit (refer to section 2.1.3);
c. When the microphone is activated, it can be
turned off by pressing the microphone On/Off
key.
Active microphone number limitation (1/2/3/4)
reached
:
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “Request” mode
a. Request to speak when the microphone On/Off
key is pressed (default 100 microphones at most,
set up the request microphone number limit at
DCS or web control ). The chairman unit can
approve or reject his/her speak;
b. When his/her request is approved, he/she can
speak and the last activated microphone will be
turn off at the same time.
E. “PTT” mode
Active microphone number limitation (1~8)
NOT
reached:
a. The microphone will be activated when the
microphone On/Off key is pressed and held, the
speaker can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is released.
Active microphone number limitation
(1~8)
reached
:
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off
106
Summary of Contents for HCS-4800 Series
