Taiden HCS-4800 Series, Installation And Operating Manual

Page: 28 / 233

A) Starting initialization
Switch on and press the “STANDBY” button,
HCS-4800 CMU will start initialization:
Pressing the function knob under initial user interface
will go to the main menu, which includes the following
menu items:
B) Initial interface on LCD
When the initialization is finished, the initial interface
will be displayed on the LCD:
“Master Vol.”
“Operation”
“Max. Active Mics”
“Unit Qty”
“IP Address”
Rotate function knob to adjust master volume,
range: -30 dB - 0 dB
C) Access main menu
Pressing the function knob under initial user interface
will go to the main menu, which includes the following
menu items:
Menu of HCS-4800M:
1. Max. Active Mics 2. Operation
3. Audio Setting 4. SI Setting
5. Numbering 6. Work mode
7. Time Setting 8. Network Setting
9. Language Setting 10. Screensaver
11. Alarm Setting 12. Test
13. About 14. Return
1. Max. Active Mics
Set the maximal number of microphones that can be
turned on at the same time: 1~8.
a). Rotate the function knob to select the sub menu;
b). Press the function knob to enter number section
interface;
c). Rotate function knob to set the maximal number of
microphones;
d). Press the function knob to save and return to upper
level menu.
2.
3.
2. Operation
Set the microphone mode “Open”, “Override”, “Voice”,
“Request” or “PTT”.
a). Rotate the function knob to select the sub menu;
b). Press the function knob to enter operation setting
interface;
c). Rotate function knob to select operation mode;
Note:

Number (1~8) setting is only valid for the
delegate unit, if the active microphone
number limitation reached, the microphones
of the delegate unit cannot be turned on, but
the microphones of the chairman unit and
the VIP unit can be turned on normally;
16