Taiden HCS-4800 Series, Installation And Operating Manual

Page: 36 / 233

b)Rotate function knob to switch between the four
numbers
c)Press the function knob to set number (at this time,
the number bold display);
d)Rotate the function knob to adjust the value;
e)Press the function knob to save the value;
f)Repeat steps b)~e) and set the other numbers;
g)Rotate the function knob to "Return" and press the
function knob to return to upper level menu.
b). Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP Address” set up.
9. Language setting
Select LCD display language from simplified Chinese,
English. Additional languages can be translated and
added by the user after accessing the web interface of
the device.
Select language:
a). Rotate function knob to select the sub menu;
b). Press function knob to enter language setting
interface;
c). Rotate function knob to select LCD display
language;
d). Press function knob to save and return to upper
level menu
.
10.Screensaver
Set LCD screensaver for main unit.
a). Rotate the function knob to select the sub menu;
b). Press the function knob to enter screensaver
setting interface;
c). Rotate function knob to select "Disable" or
"Enable";

Disable: LCD screen is always on;

Enable: LCD screen will be dark into the
protection state if do not operate the menu for a
period of time;
d). Press the function knob to save and return to upper
level menu.
11. Alarm Setting
a) Rotate the function knob to select “Disable” or
“Enable”

Disable: Disable alarm notice;

Enable: If it being actived,all congress unit will
turn off and those with LCD screen will show
“Alarm”;
b) Press the function knob to return to previous menu;
12.Test
“ Test ” includes submenus as follows:
“Key Test”
“LED Test”
Note:

When controlled by PC software, “Subnet
Mask” and “Gateway” should be setup
according to the PC configuration, otherwise it
may cause a connection problem.
Note
：

Alarming setting only suitable for
HCS-4800M/20 series main unit.
24