Predefine Position
Figure: Panorama
Figure: Predefined Position
Panorama setup: select proper matrix, camera and predefine position number, then adjust the camera angle by the four
direction buttons, and click zoom in/out button to adjust the size of the video image, at last, click “Save and Send to MU”
button to save the panorama if the adjustment is done.
You can set two panorama positions, the two predefine positions must be saved in two cameras but the two cameras
must be connected to the same matrix.
Predefined position setup procedure is as follow:
1. Enter Predefine Position interface;
2. Select one unit;
3. Select the proper matrix in the Matrix Type combo box;
4. Select the proper camera in the Camera combo box (since each conference can be equipped with multiple cameras,
the operator shall select the proper camera to give the best image of each participator);
5. Select the predefined position1 number (each camera can accommodate 64 positions);
41
Summary of Contents for HCS-4800 Series
