Taiden HCS-4800 Series, Installation And Operating Manual

Page: 35 / 233

“IP Address”
“Subnet Mask”
“Gateway”
“DHCP”
“Return”
a). Setting up unique “IP Address” for the
transmitter:
a). Select “IP Address” and press the function knob to
go to setup IP address interface;
b). Rotate function knob to switch between the four
numbers;
c). Press the function knob to set number (at this time,
the number bold display);
d). Rotate the function knob to adjust the value;
e). Press the function knob to save the value;
f). Repeat steps b)~e) and set the other numbers;
g). Rotate the function knob to "Return" and press the
function knob to return to upper level menu.
b). Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP Address” set up.
c). DHCP
Same chronological order as for “IP Address” set up.
a). Select “DHCP” and press the function knob to go to
setup DHCP interface;
b). Rotate function knob to select "Disable" or
"Enable";

Disable: disable DHCP, set network address and
subnet mask manually;

Enable: main unit gets IP address and subnet
mask automatically;
c). Press the function knob to save and return to upper
level menu.
When the network settings finished, rotate the function
knob to "5.Return " and press the function knob to
return to upper level menu.
8. Network Setting
“Network” includes submenus:
“IP Address”
“Subnet Mask”
“Gateway”
“DHCP”
“Return”
Setting up unique “IP Address” for the transmitter:
a)Select “IP Address” and press the function knob to go
to setup IP address interface;
Note:

When controlled by PC software, “Subnet
Mask” and “Gateway” should be setup
according to the PC configuration, otherwise it
may cause a connection problem.
23