Taiden HCS-4800 Series, Installation And Operating Manual

Page: 32 / 233

(2)Set the channel C language, select between
“None” or “All” ; if select “All” , refers to channel C
of booth1;
If NONE is selected for B only A outputs the selected
language of step 1. B and C do not output languages
If ALL is selected for B then 2 output channels are
available : A outputs the selected language of step 1
and B outputs any available language. No language
output at C
(3)If ALL is selected for C then rotate function knob to
select language for B from those languages that
have been selected in step b) and press function
knob to confirm;
(4)If NONE is selected for C then select channel B
language from “NONE” or “ALL”;

“NONE” stands for no language output from
channel B;

“ALL” stands for the language of channel B
which can be any of the selected languages.
Press function knob to confirm and go to
configuration for next booth;
(5)Repeat 1) - 2) to setup output channel A/B/C
language for all booths and go to step e).
e). Auto-Relay booth Setting
Setup Auto-Relay booth.
(1)Rotate function knob to select yes or no

If select “ No ”, press function knob to confirm;

If select “ Yes ”, press function knob to confirm
and go to next step;
(2) Rotate function knob to select auto-relay booth
quantity and press function knob to go to the next
step;
(3)Rotate function knob to select auto-relay booth
and press function knob to confirm, then the
corresponding booth number will be highlighted
and set as auto-relay booth. Rotate function knob
to select next auto-relay booth until all auto-relay
booths have been set;
(4) Repeat step (2) and (3) to setup auto-relay for all
other booths.
2.Interp. Unit Boost Gain
Press and rotate the knob to adjust gain, adjust range:
0~+6dB
Note:

If channel B and C of a booth have no output,
this booth can not be set as auto-relay booth.
20