Taiden HCS-4800 Series, Installation And Operating Manual

Page: 29 / 233

d). Press the function knob to save and return to upper
level menu.
“Open”:
If the maximal number of active microphones,
previously fixed, has been reached, delegates
requesting to speak join a request-to-speak list. The
first unit joining the list will become active when the first
active unit gets off.
“Override”:
If the maximal number (1~8) of active delegate
microphones has been reached and if another
delegate unit is activated, the delegate unit switched on
first will be switched off first automatically (first in / first
out). The microphone limit set remains unchanged. If
the number of active microphone (including chairman
and VIP unit) reaches 8, turning on another
microphone will switch off the delegate
microphone which turned on first.
“Voice”:
The delegate’s microphone is activated when spoken
into. After 300 ms /600 ms /1 s - 15 s (adjustable)
without speaking, the microphone switches off
automatically.
“Request”:
When the delegate presses his/her microphone
ON/OFF button to request to speak, the chairman unit
can approve or reject his/her request.
“PTT” (push-to-talk):
When the delegate presses and holds the microphone
ON/OFF button, the microphone will be activated;
when the ON/OFF button is released, the microphone
will be deactivated.
3. Audio Setting
In “Audio setting” submenu, the following parameters
need to be setup:

“Speaker Volume:”

“Line In1 Volume:”

“Line In2 Volume”

“Line Out 1 Volume”

“Line Out 2 Volume”

“Audio Mode”

“DCS Unit Mic Gain”

“Down Stream Limiter”
1).Speaker Volume
Adjust build-in speaker of congress unit(interpreter
unit is not included)volume in the system. Adjust range:
Mute, -30 dB~0 dB
a)Rotate the function knob to select the sub menu;
b)Press the function knob to enter speaker volume;
c)Rotate function knob to adjust;
d)Press the function knob to save and return to upper
level menu.
2).Line In 1 Volume
Adjust main unit line in 1 volume, Adjust range: Mute,
-30 dB~0 dB
a)Rotate the function knob to select the sub menu;
b)Press the function knob to enter Line In 1 Volume;
c)Rotate function knob to adjust;
d)Press the function knob to save and return to upper
level menu.
3).Line In 2 Volume
Adjust main unit line in 2 volume, Adjust range: Mute,
-30 dB~0 dB
a)Rotate the function knob to select the sub menu;
b)Press the function knob to enter Line In 2 Volume;
c)Rotate function knob to adjust;
d)Press the function knob to save and return to upper
level menu.
17