Taiden HCS-4800 Series, Installation And Operating Manual

Page: 134 / 233

Back of HCS-4860/80 series Back of HCS-4860/80/2M series
Back of HCS-4860X/80 series
Back of HCS-4860XD/80 series
Figure 3.8.1 HCS-4860/80 series congress units
Figure 3.8.1:
1. Earphone jack (Ø 3.5 mm)
3. Priority key with indicating light (for the
chairman unit only):

According to the priority mode configuration on the
main unit:
c) If configured as “All mute”, all active delegate
microphones (except VIP units) will be muted
temporarily when this key is pressed and they
will resume when the key is released;
d) If configured as “All off”, all active delegate
microphones (except VIP units) will be switched
off when this key is pressed. Under “Open” and
“Request” mode, pressing this key will clear the
request list (deny all delegates’ requests to
speak);

If the chairman microphone is not active, pressing
this key will activate it;

If the ring mode is configured as “ON”, a ring tone
will be produced when this key is pressed.
4. Microphone On/Off key with indicating light (for
the chairman unit)
Microphone/request key with indicating light (for
the delegate unit):

Chairman unit: press this key to activate/deactivate
the microphone;

Delegate unit: press this key to activate/deactivate
the microphone or request/cancel
request to speak.
Work state Indicating light
Microphone On Red (on)
Speaking time limit Red (flash)
Request speaking Green (on)
VIP indication Yellow (on)
5. Approve key (for the chairman unit only)

According to the order of requests, press this key
once to approve one delegate unit’s request and
turn off the active delegate microphone at the
same time.
6. Microphone

HCS-4860/80: rectangular columnar microphone

HCS-4860/80/2M: metal rectangular columnar
121