Taiden HCS-4800 Series, Installation And Operating Manual

Page: 148 / 233

3.10.4 Operation
Before a meeting starts, the congress units need to be
configured by the operator, including: numbering and
testing.Then introduce the operation of
HCS-4841DMIC multifunction connector.
1. Number
First of all, make sure that all the multifunction
connector are connected properly to the CMU. All
connector must be numbered when the system is used
for the first time or when adding or replacing congress
units. The numbering function can be activated by
application software or the main unit.
2. Speaking (without software)
Speaking mode is configured on the CMU (refer to
section 2.1.3).
A. “Open” mode

Active microphone number limitation (1~8) NOT
reached
:
a. The microphone will be activated when the
microphone On/Off key is pressed
, t
he speaker
can give his/her speech
;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.

Active microphone number limitation (1~8)
reached
:
a. Press the microphone On/Off key to request to
speak;
b. Press the microphone On/Off key again to cancel
the request to speak;
c. When an active microphone is turned off, the first
request microphone will be activated.
B
.
“Override” mode
■ Active microphone number limitation (1~8)
NOT
reached
:
a. The microphone will be activated when the
microphone On/Off key is pressed
, t
he speaker
can give his/her speech
;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.

Active microphone number limitation (1~8)
reached :
If the delegate microphone On/Off key is pressed,
its microphone will be activated and the first
activated delegate microphone will be deactivated
at the same time to maintain the active
microphone number limitation. If the number of
active microphone (including chairman and VIP
unit) reaches 8, turning on another microphone will
switch off the delegate microphone which turned
on first.
C. “Voice” mode

Active microphone number limitation (1~8) NOT
reached :
a. The microphone On/Off key indicating light
remains on. When the delegate speaks into the
microphone at a short distance, the microphone
will be activated;
b. If the delegate does not speak for several
seconds, the microphone will be deactivated
automatically. The interval time can be adjusted
at the main unit (refer to section 2.1.3);
c. When the microphone is activated, it can be
turned off by pressing the microphone On/Off
key.

Active microphone number limitation (1~8)
reached
:
All other microphones cannot be activated unless
one of the active microphone
s
is turned off.
D. “Request” mode
a. Request to speak when the microphone On/Off
key is pressed (default 100 microphones at most,
set up the request microphone number limit at
DCS or web control ). The chairman unit can
approve or reject his/her speak;
Note:

When numbering, please number the congress
units one by one and do NOT press the
microphone On/Off button of several congress
units at the same time.
135