Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 56 / 510

2-12
Hardware Installation Procedure Coral IPx Office Installation Manual
Eq
uipment Insta
llation
2
Table 2-6 Part List
(Items per IPx Office
Expansion Unit)
Item Description Quantity
Expansion unit (IPx Office * )
* For items included with IPx Office main unit, see Table 2-5 . For items included with IPx 500 or
IPx 800 expansion cages or the FlexiCom 200 cabinets, see the relevant Installation Proce-
dure and Hardware Reference Manual .
1
One ESIX Office card including a cable with 50 pin female pin-type SCSI
connector / female 50 pin ribbon SCSI connector 1
PS Office AC or DC power supply unit (AC supplied by default; DC ordered at
specific customer request) 1
Peripheral interface cards (ordered by the customer) As
required
Installation kit including: 1
„
Front 19” rack-mounting brackets attached to the unit (23” brackets are
supplied separately, at specific customer request) 2
„
M4X8 Phillips screws for rack mounting bracket 6
„
Table-mounting rubber supports 5
„
Right rear rack-mounting bracket 1
„
Left rear rack-mounting bracket 1
AC Power cord 1
DC cable harness (ordered at specific customer request) including: 1
„
Molex
TM
39-00-0078 crimp terminal 1
„
Molex TM 39-01-4031 connector (3 circuit minifit pitch 4.2mm) 1
„
Black 16AWG wire approximately 2m long 1
„
Red 16AWG wire approximately 2m long 1
Any of the following blank panels (ordered at specific customer request):
„
Full size 1
„
Half size (upper) 1
„
Half size (lower) 1
„
Half size (right) 1