Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 298 / 510

8-38
Common Control Cards Coral IPx Office Installation Manual
IM
C8
Fla
sh Memory Car
d
8
2
The flash memory card does not occupy a card slot within the Coral system. It is
inserted into the flash drive of the MCB Office card. The flash memory release button
releases the flash card. An arrow on the front side of the flash card indicates the
insertion direction. The IMC8 flash card position in the MCB Office card is shown in
Figure 8-2 .
To install a flash memory card:
1. Remove the old memory card, as described in Removing the IMC8, page 8-36
2. Verify that the power supply in the main cage is turned OFF.
3. If expansion cages are installed in the system, turn the power supply of all
expansion cages OFF.
4. Insert the flash card into the drive on the front panel of the MCB Office card.
5. Turn ON the power supply in the main cage.
6. Verify that the following two messages appear on the PI device:
For SERVICE/SOFTWARE installation menu
HIT <CTRL l> NOW
********************************
CHK RAM
END CHK RAM
Custom Init Code...
The second message may appear after two or three minutes, following several
short messages that appear during system start-up:
...................................................................................................
3 Inserting the IMC8
Turn the Coral power supply OFF. The flash card could be damaged if inserted when the
system is powered.
Push the flash card very gently during the card insertion. The flash card could be
damaged if inserted with excessive force.