manualshive.com logo in svg

Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 306 / 510

Share
Download
Tadiran Telecom Coral IPx Office Installation And Hardware Reference Manual Download Page 306

8-46

 

Common Control Cards

Coral IPx Office Installation Manual

DBM Car

d 

8

Installing the DBM Card

1.

Open the IPx Office unit. See 

Opening the Unit Cover, page 6-9

.

2.

Fasten the three hex M3X6 standoff spacers into the three holes displayed in 

Figure 8-18

.

3.

Position the DBM card on top of the MCB Office card and align the three 
fastening holes on top of the standoff spacers.

4.

Gently, but firmly press the DBM connector into MCB Office connector until 
the DBM card rests on the standoff spacers. A slight resistance will be felt as 
the cards engage.

5.

Insert the M3 spring curved washers over the three Phillips M3X6 screws and 
fasten the DBM card to the MCB Office card.

Summary of Contents for Coral IPx Office































































































































































































































































































































































































































































































































Reviews:

No comments