Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 288 / 510

8-28
Common Control Cards Coral IPx Office Installation Manual
LED Car
d
8
0
This section describes how to remove the LED Office card from the unit cover and
replace it with a new one.
To replace the LED Office card:
1. Open the unit cover.
See
Opening the Unit Cover, page 6-9
.
2. Unfasten the three M3X6 screws that connect the LED Office card to the unit
cover and safeguard for reassembly.
3. Do one of the following:
„
Disconnect the LED Office card cable from the MCB Office card. See
Figure 6-12
on page 6-11
.
„
Disconnect the LED Office card cable from the EBP Office card. See
Figure 6-13 on page 6-13 .
4. Remove the LED Office card.
5. Position the new LED Office card such that the holes in the LED Office card
are aligned with the threaded holes on the unit cover.
6. Fasten the LED Office card to the unit cover with the three M3X6 screws.
7. Do one of the following:
„
Connect the LED Office card cable from the MCB Office card.
„
Connect the LED Office card cable from the EBP Office card.
8. Close the unit cover.
See
Closing the Unit Cover, page 6-10
.
...................................................................................................
2 Replacing the LED Office Card