Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 124 / 510

4-2
Software Installation Procedure Coral IPx Office Installation Manual
Generic Featur
e Softwar
e
Upgrade
4
0
0
Use FMprog version 6.xx and above. Otherwise, the Coral will not initialize.
The upgrade of the generic feature software involves the following main steps:
„
Installing the FMprog-Utility (version 6.xx or higher)
„
Extracting the new Coral generic feature software file into the PC hard disk
„
Programming the new generic software upgrade to the IMC8 or IMC16 card
The FMprog-Utility can be used to backup the Coral software into PCMCIA cards.
The backup file is in a binary format and includes all the software components of the
specific Coral system from which it was copied, including the Coral generic software
version, the switch authorization, and the database. Copies should be made and
maintained at every customer site. Each site has its unique software configuration,
including its main software version, switch authorization and database, as well as its
specific Software Authorization Unit (SAU) information. Copies of all system files
exist and are available for use via the FMprog-Utility, if they are needed.
Use the FMprog-Utility to:
„
Manage your new database versions
„
Load the Coral generic version, authorization and database information on to
flash memory cards
„
Extract version, authorization, and database information from source files
Removing the IMC8 Card
1. Turn the power supply switch OFF.
2. Press the Reset button on the front panel of the IPx unit.
3. Press the Release button on the front panel of the IPx Office unit to remove
the IMC8 card.
...................................................................................................
2 Upgrading Using the FMprog-Utility
Before each installation or removal of an IMC8 card from the IPx Office unit, press the
RESET button on the front panel of the IPx Office unit.