Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 231 / 510

Coral IPx Office Installation Manual System Description
6-49
Sy
stem Configuration Options IPx Office
6
When an IPx 800X Expansion Cage is Used in an IPx Office System
There are situations where it is worthwhile to include an IPx 800X cage in an IPx 500
system:
„
To allow the use of Coral features not supported by IPx Office unit interface
cards (XXX Office), such as iDSP, IPG, 8DRCF, magneto stations (8SM),
Long Loop SLT, VIC, etc.
„
To allow the use of IPx 800X cages or standard CORAL cards that are already
in stock.
„
See Additional Shared Service Cards in the Expansion Cages, page 9-3 .
Setting the Configuration Jumpers
For information on setting the configuration jumpers on Coral IPx 800X cages, refer
to the
Coral IPx 800 Installation Manual, Chapter 6 .
Connecting the IPx 800X Cage to the IPx Office Unit
All IPx Office units and IPx 800 cages are interconnected with an IPx Office
expansion cable.
For systems that include one IPx 500X cage and one IPx 800X cage, always connect
the IPx 500X cage directly to the IPx Office unit. If an IPx 800X cage is installed
between the IPx 500M cage and an IPx 500X cage, a PX card will have to be installed
in slot 1 of the IPx 800X cage. This slot could otherwise be used for a service card.
Related Documentation
„
Coral IPx 500 Installation Procedure and Hardware Reference Manual
„
Coral IPx 800 Installation Procedure and Hardware Reference Manual
„
Coral FlexiCom and IPx Product Description
FlexiCom 200 CSLX Expansion cabinets require Coral IPx Office Software
Version 15.5 or higher.