manualshive.com logo in svg

Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 131 / 510

Share
Download
Tadiran Telecom Coral IPx Office Installation And Hardware Reference Manual Download Page 131

Coral IPx Office Installation Manual

Software Installation Procedure

4-9

System Database Contr

ol 

4

When the flash memory space is insufficient for saving the database (DBS), the 
following message will appear:

NO SPACE FOR SAVING DATA BASE

When at least one of the flags cannot be recognized, the following message 
will appear:

CORRUPTED

DBS

5.

When the backup is valid, the save operation continues with:

Caution: Previous backup will be lost:

Proceed with backup (Y/N) [N] 

Type 

Y

 to continue the save operation. The following message appears:

SAVING........

If the backup file is saved successfully, the following message appears:

SAVE OK..... 

If the backup file save operation fails, the following message appears:

SAVE FAILED!!

During the save operation, no database updating will occur.

Summary of Contents for Coral IPx Office































































































































































































































































































































































































































































































































Reviews:

No comments