Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 359 / 510

Coral IPx Office Installation Manual Shared Service Cards
9-47
DTMF Receiver (DTR)
9
0
The DTR requires the appropriate definitions in the database. Consult the Program
Interface (PI) and Database Reference Manual for instructions on the database
programming required for the DTR. The following parameters must be set, to enable
the
DTR :
Sizes TAB (Route: SYSGEN)
RESOURCES
URC Feature Authorization ( Route: FEAT,1)
„
URC DTMF
Separate Software Authorization is required to allocate the URC resources.
Refer to
Program Interface (PI) and Database Reference Manual, Chapter 3,
Feature Authorization for more details.
URC Configuration ( Route: CDB,11,1)
„
DTMF
Defines the maximum number of DTMF Receiver (DTR) resources to be
enabled by the system URC cards. Each DTMF receiver requires one card
resource point.
URC Card Database (Route: CDB,11,2)
„
DTMF GAIN
The gain may be adjusted in this branch and not in the Feature Control branch
as with other cards.
Card List (Route: CLIS)
Card type (see
Table 9-3 on page 9-7)
must show:
RMI-F or MR in the P_TYPE field of Shelf #1, Slot #6 .
URC2 in the P_TYPE field of Shelf #1, Slot #7 .
Port List (Route: PLIS,0)
Port type must show:
DTR in the TYPE field of Shelf #1, Slot #7,
Ckt #0-23(max. for URC2) or 0-47(max. for URC4)
See
Table 9-13
URC DTR/DTMF PI Configuration, page 9-25
.
...................................................................................................
4 Database Programming