Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 113 / 510

Coral IPx Office Installation Manual Initial Power-up Tests
3-17
Peripheral Interface Car
d Initialization
3
Table 3-2 Card Slot
Status Messages
.
Message Description Recommendations
ACTIVE
Initialization was successfully
completed. None
ACTIVE/P
Card is partially active because
there are not enough resources
to support the other sub circuits
on an 8DRCM/8DRCF card or
not all tone generators are being
used on the iDSP card. Readjust SIZES to support
unsupported sub circuits for
8DRCM/8DRCF card.
Partial Active for the iDSP card is
not critical. Readjust the
parameter value only when
needed.
REPLACED
P_TYPE and I_TYPE are not
compatible.
Both p_type and i_type fields
should show the required card
name.
The card slot has previously
been initialized by a different
card type (see the entry for
I_TYPE field, as well). Install proper card or enter
NO_CARD in the I_TYPE option.
WAIT_DB
Card has not received database,
or has not reported initialization. Continue waiting
NO_RESOURCES
Insufficient system memory to
initialize card. Check SIZES
FAULT
HDLC problem Check HDLC wiring
UNAUTHORIZED
The SAU ports are limited and
therefore the card is not
authorized for use in this system. Install an updated version of the
SAU with the appropriate amount
of ports added. Ask your dealer
for an authorized upgrade.