Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 217 / 510

Coral IPx Office Installation Manual System Description
6-35
Sy
stem Configuration Options IPx Office
6
0
The IPx Office system can be connected in any one of the following configurations:
Table 6-5 IPx Office
System Expansion
Options
The IPx Office main cage and its expansion cages maintain a continuous
“conversation”. HDLC and PCM highways, clock and synchronization signals as well
as alarms are constantly exchanged between the cages.
All data transfer is carried out via an IPx Office expansion cable. There are two IPx
Office expansion cables:
The second IPx Office expansion cable is connected between the IPx Office unit and
the first IPx 500X or IPx 800X expansion cage. If an additional expansion cage is
connected, an H500-1 cable is connected between the first IPx 500X expansion cage
and the second IPx 500X or IPx 800X expansion cage. This IPx Office cable, 47.2"
(120 cm) long, is supplied with each ESIM Office card. The cable includes a 50-pin
male SCSI pin-type connector that connects to the female connector on the front panel
of the ESIM card. The 50-pin, angled, SCSI connector is connected to the first
expansion cage.
...................................................................................................
2 IPx Office and IPx Expansion Unit Installation Configurations
System Configuration
See Figure
Min.
Coral IPx
Software
Version
1
st
Expansion
Cage
2
nd
Expansion
Cage
IPx Office/Exp. — Figure 6-33
on page 6-37
15.5
IPx Office/Exp. IPx Office/Exp. Figure 6-34
on page 6-37
15.5
IPx 500X — Figure 6-35
on page 6-37
15
IPx 500X IPx 500X Figure 6-36
on page 6-38
15
IPx 500X IPx 800X Figure 6-37
on page 6-38
15
IPx 800X — Figure 6-37
on page 6-38
15
IPx 800X IPx 800X Figure 6-39
on page 6-40
15
FlexiCom 200 CLSX — Figure 6-40
on page 6-41
15.5
FlexiCom 200 CLSX FlexiCom 200 CLSX Figure 6-41
on page 6-42
15.5