Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 366 / 510

9-54
Shared Service Cards Coral IPx Office Installation Manual
Call
er ID for SL
T (iDSP)
9
0
The CID requires the appropriate definitions in the database. Consult the Program
Interface (PI) and Database Reference Manual for instructions on the database
programming required.
The following parameters must be set, to enable
CID .
URC Feature Authorization (Route: FEAT,1)
„
URC CLID
„
SLT-CID
URC Configuration (Route: CDB,11)
„
CID
Defines the maximum number of Caller ID (CID) transmitter resources to be
enabled by the system URC cards. Each CID transmitter circuit requires 1 card
resource point.
When the CID exists and is initialized, the PI shows:
Card List (Route: CLIS)
Card type (see
Table 9-3 on page 9-7)
must show:
RMI-F or MR in the P_TYPE field of Shelf #1, Slot #6 .
URC2 in the P_TYPE field of Shelf #1, Slot #7 .
Port List (Route: PLIS,0)
Port type must show:
CID in the TYPE field of Shelf #1, Slot #7, Ckt #80-111(max.)
See
Table 9-17
URC iDSP CID (Caller ID) Transmitters PI Configuration, page 9-29 .
Refer to Program Interface (PI) and Database Reference Manual, Chapter 6,
System Port List for more details.
iDSP Card Database (Route:
CDB,9)
CLID TYPE.
...................................................................................................
2 Database Programming