Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 125 / 510

Coral IPx Office Installation Manual Software Installation Procedure
4-3
Generic Featur
e Softwar
e
Upgrade
4
0
This section provides instructions on inserting the IMC8 flash memory card after it has
been programmed with a new or upgraded software version.
Creating a Binary Backup of the Database
Before installing an IMC8 card with a new generic software version, it is strongly
recommended that you make a binary backup of the database. The binary backup must
be done by a PC using the Binary Backup PC-Utility. The Binary Backup is a tool for
Coral technicians who install, upgrade and maintain Coral systems. See the
Database
Binary Backup PC Utility Reference Manual for further details.
Installing the IMC8 Card
1. Press the release button on the PCMCIA drive of the PC to remove the new
IMC8 card.
2. Turn the power supply switch OFF.
.
3. Press the release button on the front panel of the IPx Office unit to remove the
old IMC8 card.
4. Insert the new IMC8 card containing the upgraded generic software version.
5. Turn the power supply switch ON.
6. Verify that the following two messages appear on the PI device:
For SERVICE/SOFTWARE installation menu HIT <CTRL I> NOW
*************************
CHK RAM
END CHK RAM
Custom Init Code...
...................................................................................................
3 Installing an Upgraded IMC8 Card
Turn the power supply OFF. The IMC8 card could be damaged if inserted or removed
when the system is powered.