Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 123 / 510

Coral IPx Office Installation Manual Software Installation Procedure
4-1
Generic Featur
e Softwar
e
Upgrade
4
4.1
Generic Feature Software
Upgrade
0
The Coral IPx Office is delivered to the site with factory-loaded software on the IMC8
card. The IMC8 card is an 8MB flash memory card. See
IMC8 Flash Memory Card, page
8-35 for details. The IMC8 card is installed on the front panel of the IPx Office system.
The IMC16 card is a 16MB flash memory card. For specific applications, the
IPx Office might require an IMC16 flash memory card. Contact the
manufacturer’s representative for further information.
The software initialization procedure is described in
Common Control Test, page 3-5
.
The IMC8 card contains three types of data:
„
Generic Feature Software Version and Boot Code
„
Authorization
„
Database Backup
The IMC8 card can be inserted into a PC slot using any PCMCIA application adapter
for loading a new Coral software version.
Whenever an updated version of the IPx Office software is released, the upgrade is
delivered to the sites either on 3.5
”
diskettes, via e-mail, or via other electronic media
file transfer applications. The upgrade is contained in a self-extracting compressed file
that is specific for the site.
The upgraded generic feature software must be extracted by a PC using the FMprog
tool, and then written from the PC hard disk onto the IMC8 and IMC16 cards. The
FMprog is a tool for Coral dealers who install, upgrade and maintain Coral systems
using flash memory cards. See the
FMprog PC-Utility Reference Manual . This
reference manual describes how to install and operate the FMprog-Utility.
...................................................................................................
1 Introduction