Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 441 / 510

Coral IPx Office Installation Manual Peripheral Cards
10-21
Digital T
ru
nk Synch
ron
ization
10
„
FlexiCom 200 CSLX-1 (first expansion unit, only)
PRM (shelf#2, slot2), SEC (shelf#2, slot#3)
For more information, refer to Chapter 8 of the Program Interface reference
Manual .
7. If BRI lines are used for synchronization, access the ISDN branch (Route:
DTDB, 4) to set the following parameters:
SYNC
Set this parameter to YES.
PERMANENTLY active Channel
Set this parameter to YES.
For more information, refer to Chapter 26 of the Program Interface reference
Manual .
8. Verify that the system is synchronized upon your settings:
Access the PI Synchronization branch (Route DTDB, 3), check the following
parameter:
CURR_CLK
Verify that the value 1 is displayed, indicating that the system is synchronized
by the primary synchronization source.