Tadiran Telecom Coral IPx Office Installation And Hardware Reference Manual Download Page 119

Page: 119 / 510

Coral IPx Office Installation Manual

Initial Power-up Tests

3-23

ompl

eti

e Ins

tal

3.6

Completing the Installation

Remove any other items from the shipping containers.

Remove all empty packages, crates, and debris.

Verify that you have provided all of the necessary instructions and
documentation to the system operator.

Once the system is completely installed and operating, it is no longer
necessary to keep the shipping containers.

Disconnect the KB0 cable from the front panel of the IPx Office unit.

Summary of Contents for Coral IPx Office































































































































































































































































































































































































































































































































Search results

Summary of Contents for Coral IPx Office

Reviews:

Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 119 / 510

Search results

Summary of Contents for Coral IPx Office

Reviews: