ELECTRICAL SYSTEM 7-15
COMMUTATOR
Inspect the commutator for discoloration, abnormal wear or un-
dercut
A
.
If the commutator is abnormally worn, replace the armature.
When surface is discolored, polish it with #400 sand paper and
clean it with dry cloth.
If there is no undercut, scrape out the insulator
1
with saw blade.
ARMATURE COIL INSPECTION
Check for continuity between each segment.
Check for continuity between each segment and the armature
shaft.
If there is no continuity between the segments or there is continu-
ity between the segments and shaft, replace the starter motor
with a new one.
09900-25008: Multi circuit tester set
Tester knob indication: Continuity test (
)
OIL SEAL INSPECTION
Check the oil seal lip for damage or leakage.
If any damage is found, replace the housing end.
STARTER MOTOR REASSEMBLY
Reassemble the starter motor in the reverse order of disassem-
bly. Pay attention to the following points:
Replace the O-ring with a new one to prevent oil leak-
age and moisture.
• Apply grease to the lip of the oil seal.
99000-25030: SUZUKI SUPER GREASE “A”
• Apply grease to the O-ring, and remount the starter motor.
(
3-98)
99000-25030: SUZUKI SUPER GREASE “A”
Summary of Contents for GSX-R750
