Suzuki GSX-R750, Service Manual, Page: 328 / 495

CHASSIS 6-77
DRIVE CHAIN
Use the special tool in the following procedures, to cut and re-
join the drive chain.
[ [
[ [
[
09922-22711: Drive chain cutting and joining tool set
NOTE:
When using the special tool, apply a small quantity of grease to
the threaded parts of the special tool.
DRIVE CHAIN CUTTING
• Set up the special tool as shown in the illustration.
1
Tool body
2
Grip handle
3
Pressure bolt “A”
4
Pressure bolt “B”
5
Bar
6
Adjuster bolt (with through hole)
7
Pin remover
8
Chain holder (engraved mark 500)
with reamer bolt M5
×
10
NOTE:
The tip of pin remover
7
should be positioned inside approxi-
mately 5 mm (0.2 in) from the end face of pressure bolt “A”
3
as
shown in the illustration.