Suzuki GSX-R750, Service Manual

Page: 59 / 495

ENGINE 3-11
ENGINE INSTALLATION
Install the engine in the reverse order of engine removal.
Pay attention to the following points:
NOTE:
Be careful not to damage the frame and engine when installing
the engine.
• Before installing the engine, install the spacer
1
.
• Before installing the engine, install the engine mounting thrust
adjusters
2
and
3
.
• Gradually raise the rear side of the engine assembly, and then
put the drive chain on the driveshaft.
• Install all engine mounting bolts, spacers and tighten them
temporarily. ( 3-12)
#
Be careful not to catch the wiring harness between the
frame and the engine.
• Tighten the engine mounting thrust adjusters to the specified
torque.
• Tighten the engine mounting thrust adjuster lock nuts to the
specified torque with the special tool.
! ! ! ! !
Engine mounting thrust adjuster locknut:
45 N.m (4.5 kgf.m, 32.5 lb-ft)
• Tighten all engine mounting bolts and nuts to the specified
torque. ( 3-12)
NOTE:
The engine mounting nuts are self-locking. Once the nuts have
been removed, they are no longer of any use.
• Tighten the engine mounting pinch bolt to the specified torque.
( 3-12)