Suzuki GSX-R750, Service Manual, Page: 300 / 495

CHASSIS 6-49
SUSPENSION SETTING
After installing the rear suspension, adjust the spring pre-load
and damping force as follows.
SPRING PRE-LOAD ADJUSTMENT
The set length 186.5 mm provides the maximum spring pre-
load.
The set length 196.5 mm provides the minimum spring pre-load.
(STD length: 191.5 mm)
STANDARD SUSPENSION SETTING
REAR
Spring set length
Damping force adjuster
Rebound Compression
Softer 191.5 mm (7.54 in) 1 and
³
turns out 1 and
¸
turns out
Solo riding Standard 191.5 mm (7.54 in) 1 and
µ
turns out 1 and
·
turns out
Stiffer 191.5 mm (7.54 in) 1 turn out
º
turn out
Dual riding 191.5 mm (7.54 in) 1 and
µ
turns out 1 and
·
turns out
Rebound side Compression side
DAMPING FORCE ADJUSTMENT
(Rebound side)
Fully turn the damping force adjuster
1
clockwise. It is at stiffest
position and turn it out to standard setting position.
(STD position: 1 and
µ
turns out [Fine-tune the adjuster by turn-
ing it slightly until two punch marks align.])
(Compression side)
Fully turn the damping force adjuster
2
clockwise. It is at stiffest
position and turn it out to standard setting position.
(STD position: 1 and
·
turns out [Fine-tune the adjuster by turn-
ing it slightly until two punch marks align.])