Suzuki GSX-R750, Service Manual

Page: 136 / 495

3-88 ENGINE
the clutch sleeve hub in the prescribed order.
NOTE:
Insert the outermost No.1 drive plate claws
A
to the other slits
B
of clutch housing as shown.
DRIVE PLATE:
• Install the clutch push piece
2
, the bearing
3
and the thrust
washer
4
to the countershaft.
NOTE:
Thrust washer
4
is located between the pressure plate and the
bearing
3
.
• Install the clutch pressure plate.
Direction of outside
A
No.1 Drive Plate (Thickness): 3.0 mm (0.12 in) ... 8 pcs [Purple paint]
B
No.2 Drive Plate (Thickness): 3.0 mm (0.12 in) ... 2 pcs [Green paint]
DRIVEN PLATE:
a
No.1 Driven Plate (Thickness):1.6 mm (0.09 in) ... 2 pcs
b
No.2 Driven Plate (Thickness):2.0 mm (0.08 in) ... 7 pcs
• Install the clutch push rod
1
into the countershaft.