6-64 CHASSIS
• Tighten each bolt to the specified torque.
!
!
!
!
!
Front brake caliper housing bolt
1
:
21 N.m (2.1 kgf.m, 15.1 lb-ft)
Front brake caliper mounting bolt
2
:
25 N.m (2.5 kgf.m, 18.1 lb-ft)
Front brake hose union bolt
3
:
23 N.m (2.3 kgf.m, 16.5 lb-ft)
NOTE:
Before remounting the caliper, push the piston all the way into the
caliper.
#
Bleed air from the system after reassembling the caliper.
(
2-22)
BRAKE DISC INSPECTION
Visually check the brake disc for damage or cracks.
Measure the thickness with a micrometer.
Replace the disc if the thickness is less than the service limit or if
damage is found.
Front disc thickness: Service Limit: 4.5 mm (0.18 in)
[
[
[
[
[
09900-20205: Micrometer (0–25 mm)
• Remove the brake calipers. (
6-62)
Measure the runout with a dial gauge.
Replace the disc if the runout exceeds the service limit.
Front disc runout: Service Limit: 0.30 mm (0.012 in)
[
[
[
[
[
09900-20606: Dial gauge (1/100 mm)
09900-20701: Magnetic stand
* Brake disc removal (
6-11)
* Brake disc installation (
6-14)
Summary of Contents for GSX-R750
