Suzhou MONARCH Control Technology Co., Ltd. NICE3000 New, User Manual, Page: 210 / 233

EMC NICE3000
new
User Manual
- 208 -
Controller Model
Power Capacity Rated Input Current AC Input Reactor Model
kVA (A) (Inovance)
220-NICE-L-C-4007 17.0 29.0 MD-ACL-30-4T-113-2%
220-NICE-L-C-4011 21.0 36.0 MD-ACL-50-4T-113-2%
220-NICE-L-C-4015 24.0 41.0 MD-ACL-50-4T-153-2%
220-NICE-L-C-4018 30.0 40.0 MD-ACL-50-4T-183-2%
220-NICE-L-C-4022 40.0 49.0 MD-ACL-50-4T-183-2%
220-NICE-L-C-4030 57.0 61.0 MD-ACL-80-4T-303-2%
Single-phase 220 V
NICE-L-C-2002 2.3 13.2
Consult the manufacturer.
NICE-L-C-2003 3.4 17.0
220-NICE-L-C-4007 9.8 29.0
220-NICE-L-C-4011 12.1 36.0
220-NICE-L-C-4015 13.9 41.0
220-NICE-L-C-4018 17.3 40.0
220-NICE-L-C-4022 23.1 49.0
220-NICE-L-C-4030 33.0 61.0
8.4 Shielded Cable
8.4.1 Requirements for the Shielded Cable
The shielded cable must be used to satisfy the EMC requirements. Shielded cables are
classified into three-conductor cable and four-conductor cable. If conductivity of the cable
shield is not sufficient, add an independent PE cable, or use a four-conductor cable, of
which one phase conductor is PE cable.
The three-conductor cable and four-conductor cable are shown in the following figure.
PE
Shield
PE conductor
and shield
PE
Shield
The motor cable and PE shielded conducting wire (twisted shielded) should be as short
as possible to reduce electromagnetic radiation and external stray current and capacitive
current of the cable.