Suzhou MONARCH Control Technology Co., Ltd. NICE3000 New, User Manual, Page: 182 / 233

Description of Function Codes NICE3000
new
User Manual
- 180 -
10) Current floor: indicates the information of the physical floor where the elevator is
located. It is the same as the value of F4-01.
11) Current position: indicates the absolute distance from the current elevator car to the
leveling flag of the first floor, in unit of m.
12) Car load: indicates the percentage of the car load to the rated load judged by the
NICE3000
new
system based on data from the sensor, in unit of %.
13) CTB input state: indicates the meaning of CTB inputs by bit. "1" indicates that the signal
is active.
A total of 16 bits are defined as below:
Bit Meaning Bit Meaning
BIT0 Light curtain 1 BIT8 Door open button
BIT1 Light curtain 2 BIT9 Door close button
BIT2 Door open limit 1 BIT10 Door open delay button
BIT3 Door open limit 2 BIT11 Direct travel ride signal
BIT4 Door close limit 1 BIT12 Attendant signal
BIT5 Door close limit 2 BIT13 Direction change signal
BIT6 Full-load signal BIT14 Independent running signal
BIT7 Overload signal BIT15 Firefighter operation signal
14) CTB output state: indicates the meaning of CTB outputs by bit. "1" indicates that the
signal is active.
A total of 16 bits are defined as below:
Bit Meaning Bit Meaning
BIT0 Door open output 1 BIT8 Door open button display
BIT1 Door close output 1 BIT9 Door close button display
BIT2 Door lock signal BIT10 Door open delay button display
BIT3 Door open output 2 BIT11 Non-door zone stop
BIT4 Door close output 2 BIT12 Reserved
BIT5 Door lock signal BIT13 Buzzer output
BIT6 Up arrival gong signal BIT14 Reserved
BIT7 Down arrival gong signal BIT15 Energy saving signal
15) System state: indicates the system state by bit. "1" indicates that the signal is active.
A total of 16 bits are defined as below: