Suzhou MONARCH Control Technology Co., Ltd. NICE3000 New, User Manual, Page: 189 / 233

NICE3000
new
User Manual Description of Function Codes
- 187 -
FA-35 Hall state
No. Function No. Function No. Function No. Function
0 Reserved 4 VIP signal 8 Reserved 12 Reserved
1 Elevator lock signal 5 Reserved 9 Reserved 13 Reserved
2
Fire emergency
signal
6
Door close
button input
10 Reserved 14 Reserved
3
Current floor
forbidden
7 Reserved 11 Reserved 15 Reserved
FA-36 System state 1 FA-37 System state 2
No. Function No. Function No. Function No. Function
0 Door open 1 button 8
Door open 2
button
0
Up direction
display
8 Reserved
1 Door close 1 button 9
Door close 2
button
1
Down direction
display
9 Reserved
2 Door open delay 1 10 Door open 2 2 Running state 10 Reserved
3
Direct travel ride
switch
11 Reserved 3
System full-
load
11 Reserved
4 Attendant switch 12 Reserved 4
System
overload
12 Reserved
5
Direction change
switch
13 Reserved 5
System half-
load
13 Reserved
6
Independent
running switch
14 Reserved 6
System light-
load
14 Reserved
7
Fire emergency 2
switch
15 Reserved 7 Reserved 15 Reserved
Function Code Parameter Name Setting Range Default Unit Property
FA-46 Hall call communication state 1 0–65535 0 -
●
FA-47 Hall call communication state 2 0–65535 0 -
●
FA-48 Hall call communication state 3 0–65535 0 -
●
These parameters display the communication state between HCBs of all floors and the
MCB.
FA-46, FA-47, and FA-48 respectively indicate the communication state of floors 1 to 16,
17 to 32, and 33 to 40. As shown in Figure 7-4, LEDs 5 and 4 show the floor address; LED
3 show whether the communication for this floor address is normal ("1" is displayed) or
interrupted ("0" is displayed). The communication quality can be viewed from LEDs 1 and
2: The 16 segments show the communication state of 16 floor addresses; ON indicates that
the communication is normal, and OFF indicates that the communication is interrupted.