Suzhou MONARCH Control Technology Co., Ltd. NICE3000 New, User Manual, Page: 194 / 233

Description of Function Codes NICE3000
new
User Manual
- 192 -
Function Code Parameter Name Setting Range Default Unit Property
FC-04 Opposite door selection 0–3 0 -
★
It is used to set opposite door-related control function.
The values are as follows:
• 0: Simultaneous control
• 1: Hall call independent, car call simultaneous
• 2: Hall call independent, car call manual control
• 3: Hall call independent, car call independent
For details on the use of the opposite door, see section 5.2.3.
Function Code Parameter Name Setting Range Default Unit Property
FC-06 Designated fault 0–99 0 -
☆
It is used to designate the fault to be monitored.
The designated fault code is saved in parameters of FC-07 to FC-19, and will not be
overwritten.
Function Code Parameter Name Setting Range Default Unit Property
FC-07 Designated fault code 0–9999 0 -
●
FC-08 Designated fault subcode 0–65535 0 -
●
FC-09
Designated fault month
and day
0–1231 0 MM.DD
●
FC-10
Designated fault hour and
minute
0–23.59 0 HH.MM
●
FC-11
Logic information of
designated fault
0–65535 0 -
●
FC-12
Curve information of
designated fault
0–65535 0 -
●
FC-13
Set speed upon
designated fault
0.000–4.000 0 m/s
●
FC-14
Feedback speed upon
designated fault
0.000–4.000 0 m/s
●
FC-15
Bus voltage upon
designated fault
0.0–999.9 0 V
●
FC-16
Current position upon
designated fault
0.0–300.0 0 m
●
FC-17
Output current upon
designated fault
0.0–999.9 0 A
●
FC-18
Output frequency upon
designated fault
0.00–99.99 0 Hz
●
FC-19
Torque current upon
designated fault
0.0–999.9 0 A
●