Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 95 / 404

5-15
Chapter 5: Ethernet Modules
Table 5-19. SBM-XEM-F8X4SM 10 Gigabit Ethernet Switch Module Interface
Item Description
1 Switch Fault Indicator LED
2 Switch Available Indicator LED
3 CMM Available Indicator LED
4 Reset Button
5 SFP+ 10-Gbps Uplink Ports
6 SFP+ Fibre Channel (FC) Uplink Ports
7 10-Gbps Uplink Port Link Up/Available LED
8 10-Gbps Uplink Port Link Activity LED
9 Switch Console USB Port
10 KVM for CMM Port
11 CMM Console RJ45 Port
12 Switch Console RJ45 Port
13 Module Release Handle
Table 5-20. SBM-XEM-F8X4SM 10 Gigabit Ethernet Switch Module Features
Feature Description
Chipset Broadcom BCM56820
Internal/External Ports
Internal: Ten (10-blade enclosure) or Twenty (TwinBlade enclosure)
10-Gbps downlink ports
External: Four (10-blade enclosure) or none (TwinBlade Blade) 10-Gbps
uplink ports (SPF+)
Bandwidth 480-Gbps
Trunking Link Aggregation Support (Full 802.3 ad)
Jumbo Frame Support Up to 9KB
Remote Management Browser-based management or Command Line Interface (CLI)
Protocols
Priority-based Flow Control (PFC), Enhanced Transmission Selection
(ETS), Data Center Bridging Exchange (DCBX), Spanning Tree, Spanning
Tree, Rapid Spanning Tree, Multiple Spanning Tree, LACP (802.3ad),
LLDP (802.1AB), Flow Control (802.3x), ACL, Port-based Network Access
Control (802.1x), QoS, QoSx, Egress Queuing, Strict priority, Weighted
Round Robin (WRR), Weighted Fair Queuing, IGMP snooping (v1 and v2),
Support Unicast, Multicast and Broadcast
Power Consumption 124 Watts
Operating System
Firmware (see Section 3-4: Firmware for the 1/10 Gigabit and 10-Gigabit
Ethernet Switch Modules on page 3-13 for details)