Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 202 / 404

Superblade Network Modules User’s Manual
7-74
Clicking the P
ORT
S
ETTINGS
tab brings up the VLAN P
ORT
S
ETTINGS
page ( Figure 7-62 ),
which is used to associate the VLAN ID to the port for Port based VLAN classification.
While associating different ports to VLANs, you can also configure I
NGRESS
F
ILTERING
(at the port level) and A
CCEPTABLE
F
RAME
T
YPES
(accept Tagged Frame Alone or All
frames).
The other configurations provided in this page are, enabling/disabling per Port MAC
based classification and Port Protocol based classification, enabling/disabling of
tunneling and enabling/disabling of STP BPDU Tunneling. To enable STP BPDU
Tunneling on an interface, you must first enable tunneling on that interface.
Static VLAN
Clicking the S
TATIC
VLAN
S
tab brings up the S
TATIC
VLAN C
ONFIGURATION
page
( Figure 7-63 ), which allows you to configure the VLAN related information statically.
Using the first table you can create new entries for uncreated VLANs. VLAN ID is the
mandatory field in configuring a VLAN. You can also enter a VLAN N
AME
, M
EMBER
P
ORT
L
IST
, U
NTAGGED
P
ORT
and the F
ORBIDDEN
P
ORTS
for a VLAN.
The second table displays the VLAN configurations saved in the switch.
Figure 7-63. Static VLAN Configuration Page