Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 74 / 404

Superblade Network Modules User’s Manual
4-4
4-4 SBM-IBS-Q3618M/SBM-IBS-Q3616M 4X QDR
InfiniBand Switch Modules
Figure 4-3. SBM-IBS-Q3616M InfiniBand Switch Module
Table 4-5. SBM-IBS-Q3618M/SBM-IBS-Q3616M InfiniBand Module Interface
Item Description
1 System error. Fault LED (Red)
a
a. If the fault LED goes on, the QDR switch operation is stopped. It then needs a hardware
reset or a power off cycle to bring it back into normal operation.
2 System status. Ready LED (Green)
b
b. If the Green LED is blinking, the QDR switch is overheated. Please check the air fan and
vent condition. If the fault LED goes on at the same time, a hard reset or a power off
cycle needs to be initiated.
3 External InfiniBand Ports (16 QSFP ports for Q3616M and 18 QSFP ports for Q3618M)
4 Per Port Dual-color LED, PHY link(Green)/Logic link(Amber)/ACT blinking(Green+Amber)
5 Module Release Handle
6 Internal CMM Module Ethernet Port
7 Port Numbers (First port number is top port, second port number is bottom port)
8 QDR Switch Reset and CMM Load Default
9 KVM Connector
10 CMM Activity LED
5 2 5
6
3
7 1 10 8
4 9