![Supermicro SuperBlade SBM-GEM-X2C+ User Manual Download Page 209](http://html1.mh-extra.com/html/supermicro/superblade-sbm-gem-x2c/superblade-sbm-gem-x2c_user-manual_1404297209.webp)
7-81
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Port Configuration
Clicking the P
ORT
S
ETTINGS
link brings up the D
YNAMIC
VLAN P
ORT
C
ONFIGURATION
), which allows you to configure parameters for Dynamic VLAN ports.
The parameters for this page are shown in
Figure 7-70. Dynamic VLAN Port Configuration Page
Table 7-48. Dynamic VLAN Port Configuration Page Parameters
Parameter
Description
Port
This parameter displays the Port Number, which can be selected by the
check box to the left of the column.
Dynamic VLAN Status
Use this parameter to enable/disable the D
YNAMIC
VLAN S
TATUS
.
Restricted VLAN
Registration
This parameter allows you to enable/disable R
ESTRICTED
VLAN
R
EGISTRATION
.
Summary of Contents for SuperBlade SBM-GEM-X2C+
