![Supermicro SuperBlade SBM-GEM-X2C+ User Manual Download Page 243](http://html1.mh-extra.com/html/supermicro/superblade-sbm-gem-x2c/superblade-sbm-gem-x2c_user-manual_1404297243.webp)
7-115
Chapter 7: Layer 2/3 Ethernet Switch Firmware
IPv6 Interface
Clicking the IP
V
6 I
NTERFACE
tab brings up the IP
V
6 I
NTERFACE
S
ETTINGS
page
(
), which displays the various parameters for the IPv6 Interface. The
parameters for this page are shown in
Routing Protocol
This parameter indicates the routing protocol through which the route was
learnt, if not manual. This cannot be configured.
Gateway
This parameter specifies the Next Hop Gateway to reach the IP address.
Interface
This parameter indicates the outgoing interface.
Distance (Metric)
This parameter denotes metric value of the destination.
Figure 7-101. IPv6 Interface Settings Page
Table 7-75. IPv6 Interface Settings Page Parameters
Parameter
Description
Port
This parameter specifies the Index of the VLAN interface.
Admin
This parameter indicates the Administrative Status of IPv6 on the Interface.
Oper
This parameter specifies the Operational Status of IPv6 on the given
Interface, which is a read-only field.
RA Status
This parameter indicates the Router Advertisement status on the Interface.
Table 7-74. IP6 Route Configuration Page Parameters (Continued)
Parameter
Description
Summary of Contents for SuperBlade SBM-GEM-X2C+
