Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 154 / 404

Superblade Network Modules User’s Manual
7-26
Syslog Mail Configuration
Clicking the M
AIL
tab brings up the S
YSLOG
M
AIL
C
ONFIGURATION
page ( Figure 7-21 ),
which allows you to configure the mail server and mail addresses for the syslog feature.
The parameters for this page are shown in
Table 7-10 .
Facility
This parameter allows you to select supported facilities. The switch
supports syslog standard supported facilities
LOCAL
0,
LOCAL
1,
LOCAL
2,
LOCAL
3,
LOCAL
4,
LOCAL
5,
LOCAL
6,
LOCAL
7 and
USER
.
Traps
This parameter helps you to select a particular trap type. The following
types of traps are supported A
LERTS
, C
RITICIAL
, D
EBUGGING
, E
MERGENCIES
,
E
RROR
, I
NFORMATIONAL
, N
OTIFICATION
and W
ARNINGS
.
Figure 7-21. Syslog Mail Configuration Page
Table 7-10. Syslog Mail Configuration Page Parameters
Parameter Description
Mail Server IP Address
This parameter specifies the IP address of the mail server. Make sure the
mail server is reachable.
Sender Email ID
This parameter specifies the Email ID to be shown as the From address on
Syslog Emails.
Receiver Email ID This parameter specifies the receipent Email address for Syslog Emails.
Table 7-9. Syslog Configuration Page Parameters (Continued)
Parameter Description